复合固体推进剂中固体填料的安息角测试与仿真

复合固体推进剂含有固体颗粒较多，离散单元法是一种适合固体推进剂生产过程数值仿真的有效方法，颗粒物料的接触参数是保证离散单元法仿真精度的关键。本文以复合固体推进剂的主要组分铝粉和高氯酸铵固体颗粒为研究对象，通过实验测试获得了相关物料的安息角，利用专业离散元软件EDEM仿真模拟了安息角测试实验过程，建立了物料安息角与接触参数之间的联系。研究表明，滚动摩擦系数和滑动摩擦系数越大，安息角越大，物料流动性越差。对比仿真与实验结果，通过逆向反推法确定了物料的滑动摩擦系数和滚动摩擦系数两个关键接触参数。铝粉与高氯酸铵1∶2混合颗粒的滑动摩擦系数为0.2，滚动摩擦系数为0.05。为固体推进剂加工生产过程离散元数值仿真提供了关键基础数据。     

固相萃取-气相色谱-串联质谱法测定紫菜中扑草净的残留量

目的建立固相萃取-气相色谱-串联质谱法测定紫菜中扑草净的残留量。方法样品用乙腈提取,经活性炭/氨基复合柱(Envi-Carb/NH_2)净化,经Rxi-5MS石英毛细管色谱柱分离,采用电子轰击源质谱检测,选择离子监测(selective ion monitoring,SIM)模式检测,外标法定量。结果扑草净在2~1000μg/L范围内具有良好的线性关系,相关系数r~2=0.9998。扑草净在5、10、20、50μg/kg 4种条件下,样品加标回收率在95.1%~107.9%,RSD在5.36%~7.77%(n=6),方法检出限为1μg/kg,定量限为4μg/kg。结论该方法操作简单,准确度与精密度较好,能快速简便地检测紫菜中扑草净的残留量。     

负压差对固体进料系统压力分布和气固两相流动规律的影响

A series of experiments on a solid feed system was performed to investigate the effects of negative pressure gradient on the gas-solid flow pattern and hydrodynamic characteristics. Based on the non-fluidized gas-solid two phase flow and particulate mechanics in the standpipe, a method for predicting the pressure of the air passing through the recycle chamber and the pressure drop through the loop seal slit in these systems is also presented. The predicted pressure profile along the negative pressure gradient from the proposed model exhibits a good agreement with the experimental data. The experimental data show that the gas flow in the standpipe is always upward in the negative pressure gradients, while the direction of gas cannot be changed by the drag force. The solid flow rate, the materiel bed height in the recycle chamber (Hf), the pressure drop across the slit (△Pg） decrease with an increasing negative pressure gradient. At a given negative pressure gradient, the superficial gas velocity through the recycle chamber of the loop seal does not affect the pressure drop in standpipe. It increases with an increasing negative pressure gradient.     

固态法蒸馏酒与液态法蒸馏酒产品风味研究进展——以中国白酒与葡萄白兰地为例

酒产品的蒸馏技术主要为固态蒸馏技术和液态蒸馏技术，不同的蒸馏技术由于原理、设备和工艺的不同，所形成的产品风味各有特色。该文以两种蒸馏技术所形成的经典产品为例，对中国白酒与葡萄白兰地的主要风味区别进行概述，阐明其异同。并探讨原料、微生物和设备，以及相关生产工艺对产品风味及成分的影响。为开发出适合中国大部分消费者口感的白酒与葡萄蒸馏酒产品提供参考。     

Adsorption isotherm and kinetic modeling of a novel procedure for physical modification of silica gel using aqueous solutions of 4,4′-(1,2-ethanediyldinitrilo)bis-(2-pentanone) for preconcentration of Ni(II) ion

ABSTRACT

Aqueous solutions of 4,4′-(1,2-ethanediyldinitrilo)bis-(2-pentanone) (EDDBP) have been used in a novel green procedure for the physical modification of silica gel (SG) for solid-phase extraction and preconcentration of Ni(II) ion. Optimization experiments were carried out at 301 ± 1 K by batch technique. The EDDBP-modified SG was characterized using X-ray Diffraction Spectroscopy (XRD) and Brunaeur-Emmett-Teller (BET) determinations. The adsorption isotherm and kinetic models indicated a physisorption process. The modified SG showed moderate to high adsorption capacity values for Ni(II) ion (~98% removal efficiency) at pH 8. A sorption mechanism for Ni(II) chelation with EDDBP-modified-SG was proposed. These results suggest the procedure has advantages.     

Microstructural,electrophysical and gas-sensing properties of CeO2–Y2O3 thin films obtained by the sol-gel process

Nanopowders and thin films of (СeO₂)_1-x(Y₂O₃)_x composition (x = 0.10, 0.15 and 0.20) were obtained by the sol-gel process, using hydrolytically active complexes of the metal alkoxoacetylacetonate class [M(C₅H₇O₂)_3-y(C₅H₁₁Oⁱ)_y] (M = Ce³⁺ and Y³⁺) as precursors. The impact of the chemical composition and crystallization conditions on the microstructure, electrophysical and chemosensory characteristics of the obtained planar-type solid electrolytes was studied. The prospects of the thin-film nanostructures obtained as receptor components of resistive oxygen sensors, as well as of electrolytes of planar-type intermediate-temperature solid oxide fuel cells (SOFC) have been shown. It has been found that (CeO₂)_0.90(Y₂O₃)_0.10 thin films demonstrate the maximum values of electrical conductivity (550 °C) and the highest sensory response when detecting oxygen (concentration range 1–20%, operating temperature range 300–450 °C).     

基于流固耦合的柱面气膜密封支撑结构性能研究

利用流固耦合分析方法,研究一种波箔结构柔性支撑柱面气膜密封,探讨气膜厚度、浮环与转子的偏心率以及柔性支撑结构的泊松比、弹性模量、波箔数量等参数对支撑结构等效应力及变形量的影响。结果表明:柔性支承结构满足柱面气膜密封的正常运作,不会造成因为气膜刚度过大而使得浮环与波箔发生破坏性变形,并且变形量远小于波箔高度;柔性支撑的等效应力和变形量随平均气膜厚度的增大而减小,随偏心率的增加而增大,随支撑材料泊松比的增大而增大;弹性模量的增加并不影响柔性支撑结构的等效应力,但是会使变形量减小;增加波箔数量,柔性支撑的等效应力略有减小,变形量显著减小。     

有色金属工业含砷污染物处理研究进展

综述了有色金属工业砷污染物的来源及其无害化处理的方法,分析了包封固砷(水泥固化和玻璃固化)和矿物固砷(钙盐、铝盐、镁盐、硫化沉淀法)的优缺点和局限性,重点对将砷以臭葱石形式进行安全处理的合成方法和浸出稳定性的研究现状进行阐述。分析表明,晶态臭葱石合成是将砷以臭葱石形式进行安全处置的基础,稳定性是关键,进一步降低溶液过饱和度以实现大尺寸、高稳定性臭葱石的合成是发展方向。